Welcome to your environment! You can order everything from your assortment with your personal budget here.

You can always return to the normal Coolblue website by clicking here.

Your outstanding budget (incl. VAT) is always visible here, so you know exactly how much you can spend.

Coolblue home

Die Website ist auf Englisch, möchtest du sie auf Deutsch ansehen?

Written by Marijn

8 tips if the dispenser of your fridge doesn't work

Doesn't your fridge dispense water or ice cubes? This can have various causes. The dispenser might be installed improperly, or there's air in the water pipes. In this article, we'll share 8 tips, so your dispenser will work again soon.

Solve a dispenser problem with 8 tips

Dispenser problem

With the 8 tips below, you can solve problems with your dispenser.

  • Tip 1. Wait a few hours
  • Tip 2. Install the dispenser properly
  • Tip 3. Disable the child safety lock
  • Tip 4. Check the water pipes
  • Tip 5. Vent the water pipes
  • Tip 6. Check the temperature
  • Tip 7. Fill the tank
  • Tip 8. Check the ice dispenser

Tip 1: wait a few hours

Wait a bit

Did you just get the fridge? It takes some time before the dispenser works, because the fridge is still warm on the inside. Wait until the fridge has the desired temperature.

Tip 2: install the dispenser properly

Install dispenser

When your dispenser isn't installed properly, it can lead to problems. Check the manual to see you to properly install the dispenser. Check if the connectors and the water filter are in order. Is the water filter blocked? Replace it with a new one.

Tip 3: check the child safety lock

child lock

Does your model have a child safety lock? When the child safety lock is enabled, the fridge won't dispense water or ice cubes. Check the manual to see how to disable the lock.

Tip 4: check the water pipes

Water supply hose

Check the water supply hose of fridge. Make sure it's not bent or squashed. If the hose is alright, make sure the water supply is open. Doesn't the supply work? Contact a plumber.

Tip 5: vent the water pipes

Vent water pipes

If you replace the water filter or connect the fridge for the first time, there might be some air in the pipes. Put a large bucket underneath the dispenser. Press the dispenser for 5 seconds and release it. Repeat this until it dispenses water. Let 3L of water run into the bucket. You have now vented the water pipes.

Tip 6: check the temperature

Fridge temperature

The dispenser is inside the fridge, so it stays cooled. If the temperature in the fridge is too hot or cold, the dispenser won't work properly. That's why you have to check the temperature of the fridge. You can find the recommended temperature in the manual.

Tip 7: fill the tank

Reservoir

Do you have a fridge that's not connected to the water supply? In that case, you have to fill the tank manually. Make sure there's enough water in it.

Tip 8: check the ice dispenser

Ice dispenser

Doesn't the ice dispenser work? Check if there are ice cubes stuck. Did you just turn on the fridge, or haven't you used the dispenser in a long time? Wait until the fridge reached the right temperature.

Marijn
Article by:
Marijn Fridge Expert.
Personal chat Digitalk.
You're now chatting with Coolblue customer service
This chat is closed
foo
Oeps File size is larger than 5MB. Upload a smaller file.