The most common errors of LG washer dryer combinations

If you see the error code IE on the display, there's a problem with the water supply. First, check if the tap is open all the way, so enough water can come out. Make sure the supply hose isn't kinked. After that, check the filter in the hose. Close the tap, remove the supply hose, and clean the filter at the end of it. Re-attach the hose and open the tap.

If your washer dryer displays the AE code, you're dealing with a leak. You'll have to turn off the appliance and remove the connector from the socket. Shut off the water supply completely, so it doesn't supply the washer dryer combination with water. After that, you should contact the point of sale of your appliance. Isn't your appliance under warranty anymore? Contact LG directly.

The error code OE indicates that something's up with the water drain. Check the drain hose and make sure it's not kinked. Make sure the drain pipe isn't clogged. Don't insert the drain hose into the pipe more than 10cm, and make sure the drain isn't higher than 1m. It's also important to check the filter under the machine and clean it. Read how to do that in the article below.

Error codes dE, dE1, dEz, or dE4 indicate an issue with the door. Open the door and ensure that laundry isn't stuck between it. Close the door until you hear it click. Doesn't this work? The door lock or sensor might be broken. If that's the case, contact LG so a technician can have a look.

Do you see the dHE error code on the display? The dryer functions of washer dryer combination aren't working. Pull the connector out of the socket and wait 30 seconds. Put the connector back in the socket and turn on the appliance. Do you still see the code? Contact the point of sale or the supplier.

The error code TE points to a control issue. Turn off the appliance and remove the connector from the socket. Shut off the water supply as well. To solve this error, contact the customer service of the point of sale or LG.

Didn't any of the solutions work? Try to unplug the connector from the socket for 30 minutes and restart the program after that. Doesn't this work either? Unfortunately, you can't always solve an error yourself. You might need help from a technician. If you bought the washer dryer combination at Coolblue and it's still under warranty, you can contact our Customer Service. Isn't it under warranty anymore? Contact LG.